The CoBolt range can be used for cutting nails and screws or for cutting wire mesh or fencing. Electrical contractors working with cable basket and cable tray will also find the range useful and comfortable to use.  

With its practical size (200mm) and low weight of less than 400g, the 71 01 200 Knipex CoBolt compact bolt cutter can master piano wire up to a diameter of 3.6mm reliably. They can also cut bolts, nails and rivets up to a diameter of 6mm (in the case of soft material).

The precision cutting edges made of chrome-vanadium high-performance steel are induction hardened to guarantee the greatest cutting-edge hardness. The particularly efficient lever action mechanism enables an extremely favourable lever ratio with simultaneously low friction. The CoBolt reinforces the hand force used to grip the handles 35 times over. Every cut hits the mark straightaway: microstructures on the cutting edges hold the material in the perfect position.

The 71 42 200 Knipex CoBolt compact bolt cutter, meanwhile, is an example of how the range has been adapted for different professional uses. With its multi-component grips, the 71 42 200 version is without a collar for better handling and easier transport.

An opening spring and locking device are integrated in the handles and the tool features a recess for easier cutting of thicker wires. It too has precision cutting edges for soft, hard and piano wire, and it cuts bolts, nails and rivets up to approximately 5.2mm.

One big difference, however, is the 20° angled head with joint bar on one side and side cutter for almost flush cutting on the other. This also provides suitable space for gripping.

Two Knipex CoBolt XL versions complete the range.  

www.knipex.com

The information on products and services presented on this page is supplied by third parties. Publication on HVP's website does not constitute an endorsement of the product or service by HVP.