The stand-alone or cascade (linear or back-to-back) configurability, and the high-power modulation ratio (1:8 as stand-alone; 1:32 in cascade) allow Condexa HPR to adapt to large variations in system heat demand, making it suitable for a wide variety of applications, from residential units to data centres, schools, commercial buildings or industrial plants.

The Condexa HPR range consists of four models from 35 to 70kW, all equipped with a modulating circulator enabling a variable flow rate according to the flow and return temperatures, to allow operation in maximum condensation conditions.

The new combustion modules are equipped with a stainless-steel heat exchanger and premixed burners, fitted with a wire mesh combustion head and air-gas mixer, and allow a wide modulation range, silent operation and reduced pollutant emissions.

The cascade system of up to four modules, which can achieve a total output of 280kW, is controlled by the Cascade Manager accessory device, that can regulate the ignition and power modulation of all system modules. The redundancy of the cascade's thermal modules provides uninterrupted operation of the Condexa HPR system, even during maintenance.

A range of optional accessories completes the offer. These include the possibility of interfacing primary and secondary circuits with both hydraulic separator and plate heat exchanger, electronic modules for remote control, management of additional thermal zones, production of domestic hot water, also with solar integration, hydraulic kits for cascade installation and the set of components for the management of the flue system.

riello.com

The information on products and services presented on this page is supplied by third parties. Publication on HVP's website does not constitute an endorsement of the product or service by HVP.