The new generation TorFloor 2 evolves from the TorFloor predecessor by adding a 6mm thick chipboard upper panel with pre-foiled aluminium heat diffuser. Crucially both panels feature matching routed channels to perfectly align around the 12mm water pipe, while the printed upper face clearly indicates the pipe’s position and the points where screws can be safely fixed.

Not only does this arrangement greatly reduce the risk of the pipe runs being accidentally damaged when floor coverings are installed or replaced, but the location of the routed channels places the warm water pipes closer to the surface, delivering faster warm-up times. This design means that an output of 50W/m² can be achieved with a flow temperature of 41^oC, making TorFloor 2 suitable for coupling with the air or ground source heat pumps offered by OMNIE, while a 50^oC flow will raise the output to 84W/m². 

Brendan Hourican, Sales Director for OMNIE, commented: “The launch of TorFloor 2 is an important landmark for our brand, helping ensure we will maintain our market leading position in the underfloor heating industry, while offering building occupants and specifiers, high efficiency in operation. Incorporating the pipe positions and warning labels onto the top panel will significantly lower the risk of pipes being damaged, giving greater reassurance to building owners and landlords in particular.” 

At an overall thickness of 28mm (6mm upper and 22mm lower panels combined), the 2,400mm long by 600mm deep TorFloor 2 system is a direct replacement for standard chipboard flooring, with precision machined T&G edges making for rapid installation across timber joists or battens. Pipe centres, as indicated by the printed pattern, are 150mm.

www.omnie.co.uk

The information on products and services presented on this page is supplied by third parties. Publication on HVP's website does not constitute an endorsement of the product or service by HVP.