The new KNIPEX DP50 (90 23 01) pipe cutter for plastic pipes is a perfect tool for plumbers that combines two functions in one. Larger pipes with diameters of 32, 40, and 50mm can be easily and precisely cut and chamfered in just one operational step, so there is no need for subsequent deburring or readjustment during the cut. Thanks to its design, blockages or damage to seals due to improper deburring are also avoided.

The KNIPEX DP50 tool is suitable for all standard household plastic pipes (commonly drainage pipes) with a diameter of 32, 40, or 50mm, and wall thicknesses up to 2.4mm. The reversible blade can be changed without tools, and is made of high quality ball-bearing steel, ensuring a smooth cut.

Self-adjusting rollers with plain bearings guide the pipe to be cut optimally and safely. For precise positioning, the user's view remains unblocked on the pipe to be cut. The cutting blade is spring-loaded – once set, it exerts enough pressure so that no adjustment is necessary.

Trimming or fine cutting is possible from a section length of around 10mm. Pipes can be cut with a little safety allowance during installation and then precisely cut to the required length in a subsequent re-cut. Made of glass fibre-reinforced plastic, the body of the KNIPEX DP50 is robust and durable.

The information on products and services presented on this page is supplied by third parties. Publication on HVP's website does not constitute an endorsement of the product or service by HVP.