Clever Coupler prevents the need to cut out valves and equipment, and the use of slip sockets.

The product is available in 22mm and 28mm kits, comprising of two stub adaptors, two insert adaptors, two WRAS-approved fibre washers, four WRAS-approved O-rings, and a WRAS-approved silicone lubricant grease sachet.

Clever Coupler is compatible for use with a wide range of equipment for 22mm and 28mm compression, and 3/4” BSP & 1” BSP female pattern.

Ty Harnett, Director at Clever Coupler, said: "Clever Coupler was born from many years facing the frustration of cutting out valves and equipment whether leaking or faulty and then having to use slip sockets to refit in-situ.

"Clever Coupler solves the problem permanently once fitted, to slide out valves and equipment due to the simple design.

"The design means it is impossible to overtighten and prevents weeping; and it features five seals compared to two for a typical compression joint.

"Clever Coupler, when fitted with isolation valves on the stub adapters (22mm and 28mm), means the system water does not need draining, saving time to both asset owner and engineer on-site."

The information on products and services presented on this page is supplied by third parties. Publication on HVP's website does not constitute an endorsement of the product or service by HVP.