Unidrain has expanded its range to include a newly developed outlet unit with an extra low installation height – just 69mm.

The solution includes a new water trap with a height of 50mm. This new outlet unit is almost 20mm lower than the manufacturer’s existing outlet units.

“We’ve developed a solution where the building height is lowered by almost 20 mm, which actually means a lot in construction. The extra-low outlet unit and water trap provide several benefits on-site which combine to make installation both easier and faster. It is particularly beneficial for renovation and conversion projects as they benefit from a lower drainage installation that’s easier to build into an existing floor,” said Lasse Lyck, Technical Manager at Unidrain.

The water trap effectively guides the water out of the shower and eliminates odour. The water capacity in the new water trap is 32 litres per minute; making the solution well above the minimum requirement of 24 litres per minute. The water trap can easily be dismantled for cleaning and if a rear facing outlet is required the trap can be rotated as needed.

“We kept the height as low as possible, so the installation also ends up being very low but without compromising on either function or effectiveness. We’ve optimised the solution in terms of size whilst at the same time retained all its benefits and lots of capacity,” added Lasse.

In addition to being VA-approved, the product meets all common Danish standards, such as BR18 (including SBi Guideline 252) and DS 432. In addition, the solution meets the important European standard EN1253 and is approved in most European countries.

The information on products and services presented on this page is supplied by third parties. Publication on HVP's website does not constitute an endorsement of the product or service by HVP.